Slide background
Slide background
Slide background
Slide background

3rd Party Accredited testing in Japan by: DRD Co. Ltd. results 10% fuel savings

.

What is MoreMPG™

About MoreMPG™

air pollution

Advanced Lubrication nanotechnology

MoreMPG™, makes the most of what racing experts have known for decades. Engines manufactured from ceramic outperform metal engines—hands down.

MoreMPG™ is not an oil additive or an oil replacement. Its groundbreaking formula uses nanotechnology to create a protective barrier by embedding a 2 - 6 micron depth of ceramic seal into all internal metal surfaces. This advanced technology protects metal parts upon impact in the following:

  • Engines
  • A/ Transmissions
  • M/ Transmissions
  • Gearbox
  • Differentials
  • Wet Axles
  • Hydraulics
  • Hydrostatic
Awesome Image

Once treated it cleans & penetrates.

Once treated it cleans & penetrates through the carbon to get to the metal, using the finest quality in nanotechnology with a capacity to clean and seal the metal to a hard ceramic finish, will not allow the formulation of sludge and abrasive carbons, allowing the sealed piston rings to have the same spring effect as when the engine was new. MoreMPG™ also cleans and fuses to the walls of the cylinders and any other components in contact with oil. MoreMPG™ has been proven to reduce soot in oil analysis in the range of 60 - 70%.

  • Engines
  • A/ Transmissions
  • M/ Transmissions
  • Gearbox
  • Differentials
  • Wet Axles
  • Hydraulics
  • Hydrostatic
Awesome Image

Quickly penetrates and dissolves,

MoreMPG™ Quickly penetrates and dissolves, Varnish, soot and carbon buildup without Solvents. Fuses a permanent sub surface internal bond within metal at a molecule size of < 0.001 to 0.003 mm, up to 6 microns in depth of a ceramic shield of a glass like finish that provides a protection from abrasion, by forming a near diamond hard surface film on and below metal surfaces, leaving the internal metal surfaces clean and as near new condition as possible. Will not allow the formulation of sludge and abrasive carbons on or between parts, Keeps your engine clean

  • Engines
  • A/ Transmissions
  • M/ Transmissions
  • Gearbox
  • Differentials
  • Wet Axles
  • Hydraulics
  • Hydrostatic
Awesome Image

Save Fuel and reduce Emissions.

One of the main reasons why MoreMPG™ treated engines result in fuel savings and emissions control are due to the reaction of Oil on Hot Metal vs Oil on Hot Ceramic treated metal. When oil is in contact to hot metal it repels, and on hot MoreMPG™ ceramic sealed metal, oil spreads out and won't run off, creating a near perfect seal around the piston rings and the sleeve almost eliminating blow-by which increases compression, that creates a better burn which equals more horse power, saves fuel and significantly reduces un-burnt fuels. (Emissions).

  • More Compression
  • More Horsepower
  • Saves on Fuel
  • Reduces Emissions
  • Reduces Blow-by
  • More Torque
  • Reduces Friction
  • Reduces Wear
Awesome Image

MoreMPG™ can be applied to any system that requires lubrication

Yes MoreMPG™ can be applied to anything that requires lubrication. It can also be applied to Motorcycles and will not effect the clutch system. MoreMPG™ will bring back performance like the day it was new. MoreMPG™ can be added to diesel or gasoline engines, either 4 stroke or 2 stroke engines. Also manual transmissions, automatic transmissions, gearboxes, hydraulics and hydro-static it can be added to lawnmowers, weed eater and chain saws.

  • Engines
  • A/ Transmissions
  • M/ Transmissions
  • Gearbox
  • Differentials
  • Wet Axles
  • Hydraulics
  • Hydrostatic

How to improve your Fuel Economy

MoreMPG™ is an environmentally safe, non-flammable, inert formulation with zero V.O.C.’s, no solvents, silicone graphite, molybdenum or PTFE’s. Most importantly, it will not change the viscosity of any OEM recommended fluids. MoreMPG™ reduces toxic emissions by as much as 92%. MoreMPG™ is truly a revolutionary metal treatment, which contributes in reducing air pollution and  better fuel economy

Here's what you need for fuel economy

Awesome Image
Awesome Image

Semi-Truck

16 oz bottle for the Engine

8oz bottle for the transmission

8oz bottle for each Differential

Read More

Semi-Trucks

Awesome Image
Awesome Image

Engine

1. Warm engine to normal temp.

2. Apply 16oz to engine oil.

3. Immediately Drive min 50km

Read More

Treat Engine

Awesome Image
Awesome Image

Drivetrain

3oz for Automatic Transmission

8oz to manual transmission

8oz in each differentials

Read More

Drivetrain

Customers FAQ’s

When should I apply MoreMPG™?

You may apply it on a fresh oil change, but if your engine's oil is still good for a minimum of 5,500 km on a semi truck or 2,500 km for an automobile. This leaves enough time for MoreMPG™ to clean and fuse to the engine's components.

How do I apply MoreMPG™ to my engine oil?
How often do I re-apply MoreMPG™?
Is MoreMPG™ an oil additive?

We take emissions seriously

Contact Us with your details

  
Joomla forms builder by JoomlaShine

Get in touch

1-800.727.6019

send us an email

support@morempg.ca

Find a Dealer

Nearest you

Working Hours:

Monday: 09.00am to 17.00pm

Tuesday: 09.00am to 17.00pm

Wednesday: 09.00am to 17.00pm

Thursday: 09.00am to 17.00pm

Friday: 09.00am to 17.00pm

Saturday: On Call

Sunday: Closed