Here is how to reduce emsissions

Testimonials

How to fix it

16oz2MoreMPG™ is an environmentally safe, non-flammable, inert formulation with zero V.O.C.’s (volatile organic components). It contains no solvents, silicone graphite, molybdenum or PTFE’s. Most importantly, it will not change the viscosity of any OEM recommended fluids. MOREMPG™ reduces toxic emissions by as much as 92% from Hydrocarbon, NOx, PM, and Carbon Monoxide

MoreMPG™, makes the most of what racing experts have known for decades. Engines manufactured from ceramic outperform metal engines—hands down.-

MoreMPG™ is not an oil additive or an oil replacement. Its groundbreaking formula uses nanotechnology to create a protective barrier by embedding a 2 - 6 micron depth of ceramic seal into all internal metal surfaces. This advanced technology protects metal parts upon impact in:

1. Engines  = 2. Transmission   = 3. Gearboxes 

4. Anywhere there is a need for lubrication protection.

Applying MoreMPG™ does not affect factory clearances. How it Works: Normally, oil drains off parts when the engine or component stops. This results in an inadequate layer of lubricant and causes wear on metal parts with each cold start.

wheelie truck

MoreMPG™ gives a superior protection upto 1900F (1038C) that won’t drain off—even when the engine shuts down. The result:

  • Less strain on equipment during startup

  • Protection from wear and oxidation

  • Improved fuel efficiency

  • Improved power and performance

  • Reduces friction (harmonics) Quieter operation

  • Reduced emissions of harmful greenhouse gases.

MoreMPG™ creates a hard ceramic finish that survives impact, as well as expansion and contraction without separating from the metal. Lubricating pigments can carry loads in excess of 350,000 P.S.I, preventing metal-to-metal contact. That’s over 20 times the protection of any oil or additive.

Earth Friendly: MoreMPG™ is an environmentally safe, non-flammable, inert formulation with zero V.O.C.’s (volatile organic components). It contains no solvents, silicone, graphite, molybdenum or PTFE’s. Most importantly, it will not change the viscosity of any OEM recommended fluids. MOREMPG™ reduces toxic emissions by as much as 92% from Hydrocarbon, NOx, PM, and Carbon Monoxide.

Compacted Graphite Iron High Powered Microscopic View

Capture Heat and Creates Blow-by     Cleaned and Sealed to a Glass Like Finish
output untreated3 50x20transparent 50x20transparent output green
Iinadequate Lubrication, Blow-by and Harmonic Vibrations which Robs the Engine's Performance.
    Seals Imperfections, Attracts oil & increses compression, Reduces Blow-by, Harmonic vibrations & Restores Power

 

More on How

  • MoreMPG™ cleans and fuses with the carbon chains within the metals sub-surface, once fully cured MoreMPG™ becomes a glass smooth finish, eliminating surface imperfections within the metals mating surfaces.
  • The surface boundary layers formed by MoreMPG™ have a sub-micron molecular structure with the worlds most advanced friction reduction characteristics.
  • MoreMPG™ Surface Pressure Modifier significantly reduces temperatures, pressure, and friction between moving surfaces (boundary friction and wear). Constant change of temperatures during operation and/or pressure of friction is increased. MoreMPG™ activates a series of chemical reactions with carbon acids and H2O in order to reduce resistance.
  • This Surface Pressure feature is a MoreMPG™ advantage over all other products sold today.
  • MoreMPG™ quickly penetrates and dissolves varnish and soot and cabon buildup without Solvents.
  • MoreMPG™ fuses a permanent sub surface internal bond within metals with a ceramic shield of a glass like finish that will not allow the formulation of sludge and abrasive carbons on and between parts, leaving the internal metal surfaces clean and as near new condition as possible. Keeps your engine clean
  • MoreMPG™ seals the metal surface pores at a molecule size of < 0.001 to 0.003 mm, up to 6 microns in dept, provides protection from abrasion by forming a near diamond hard surface film on and below metal surfaces
  • Once set MoreMPG™ releases the varnish and carbon build up back into the lubricant stream to be cleaned by the inline filtration system.
  • MoreMPG™ starts to activate at temperatures above 44° F. The higher the temperature, the faster the activation time, the more hours of constant operation the faster the final results will become apparent.
  • The resulting compound is harder, not due to making the original friction area harder, but rather by filling in the pits, cracks, and uneven surface of the metal, making the surface as near perfectly smooth as is mechanically possible. This will not change dimensions of contacted parts. And most importantly does not fill or effect the crosshatch.

Treatment Amounts

Vehicle ModelEngineTransmissionAuto Transmissonper Differentials
Semi-Truck Over 300 HP
16oz
8oz
3oz
8oz
Heavy Equipment Under 300 HP
8oz
8oz
3oz
8oz
Farm Tractors 100-200
8oz
Hydrostatic 8oz
Gears  8oz
N/A
Diesel Pickup's
6oz 4oz 2oz 4oz

Get in touch

1-800.727.6019

send us an email

support@morempg.ca

Find a Dealer

Nearest you

Working Hours:

Monday: 09.00am to 17.00pm

Tuesday: 09.00am to 17.00pm

Wednesday: 09.00am to 17.00pm

Thursday: 09.00am to 17.00pm

Friday: 09.00am to 17.00pm

Saturday: On Call

Sunday: Closed